Turn on Airplane Mode Enabling Airplane mode turns off most of the network connections on your phone, including cellular network. So turn it off for a few seconds and enable it again. Hopefully, that should fix problems with Wi-Fi calling. To turn on Airplane mode on your iPhone, go to iPhone Settings.
Reset Network Settings Open iPhone's main menu and go to the settings tab. Select the general settings field and tap on the reset button. Click on the reset network settings button and wait for the reset procedure to start. Once the reset has been completed, reconnect your iPhone to the 5ghz wifi band network.
Check Your Settings Make sure you haven't accidentally turned your WiFi network connection off. Go to your Settings app (or swipe up to access your Control Center on an iPhone or iOS Device) and make sure that WiFi is toggled on and that Airplane Mode is toggled off.
Go to Settings > Wi-Fi and make sure that Wi-Fi is on. Tap the name of your Wi-Fi network to join. A blue checkmark beside a network name means that you're connected. If you see Auto Join Disabled under your Wi-Fi network name, tap it turn on Auto-Join.
If all your devices get no internet connection, yet your WiFi indicator is still on, the most obvious answer is that your internet provider has an outage. Before you start rebooting and shuffling wires around, it's always a good idea to check this first.
These are the most common reasons: The hardware of your computer doesn't support 5GHz bandwidth. The WiFi router does not support 5GHz bandwidth. 5GHz is set up incorrectly in your PC or in your WiFi router.
Check if the adapter is correctly connected to your WiFi network and placed close to your router. Ensure that your network's bandwidth is 2.4 GHz and that your mobile data is switched off. Reset your adapter by pressing and holding the reset button on the device for 10 seconds.
It may be that the Internet connection is not detected. Stopping the game from the taskbar and restarting it while the Internet connection is enabled should solve this problem. If it doesn't, please turn off your device for 2 minutes, restart it, re-establish the Internet connection and then launch the game.
If you can't get your projector connect to your Wi-Fi, even if it shows as an available network on your projector's Wi-Fi settings, you might have a faulty Wi-Fi module. Ensure that you try to connect a different device (e.g. smartphone, tablet, PC) to your network via Wi-Fi.
First solution: Reboot your wireless modem/router. A faulty or old wireless router/modem can be prone to firmware crashes that could cause connectivity issues to some devices. It might have been the reason why your iPhone X is experiencing poor Wi-Fi signal reception, plus those software glitches.
If it is not due to an iOS Wi-Fi bug, other factors that can possibly cause WiFi keeps dropping problem would include temporary outage, firmware issues on the wireless router/modem, corrupted Wi-Fi network, invalid or misconfigured network settings, and other forms of software glitches.
There are times where the problem isn't your iPhone, but instead, it's the router for the network you're trying to connect to. Problems commonly arise when software updates are trying to be installed and end up getting “stuck”. So you'll want to power cycle your router and then reconnect your iPhone.
Turn on the Wi-Fi switch of the phone
The main culprits are: Weak Wi-Fi signal – Try moving your printer closer to the Wi-Fi router. Incorrect Wi-Fi network settings – See step 2. Software issues such as out of date firmware or drivers – See step 3.
Go to the wifi section of your iPad settings and ensure you are still connected to the SkyTrak in either direct or network mode. 8. Open the SkyTrak app and wait for the SkyTrak to reconnect. You can check that your SkyTrak is updated with the latest 1.5 firmware from the About section of the profile menu.