If it says “Headphones” or the name of one of your Bluetooth devices, then the audio is actually playing somewhere else. Disconnect from that other device, then try to play audio from your iPad's speaker again.
That's true — the problem is that your iPad thinks headphones are plugged in. This occasionally happens when lint, dirt, liquid, or other debris gets stuck inside the headphone jack. You can quickly check to see if your iPad is stuck in headphones by pressing the volume buttons again.
At this point, this problem is being caused by one of two possibilities: Debris stuck inside the headphone jack or Lightning port is fooling your iPhone into thinking that headphones are plugged in. The headphone jack or Lightning port is damaged, either physically or by liquid.
Go to Settings > Bluetooth and turn off Bluetooth. If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device. If the device is in a case, make sure that the case doesn't block the speaker.
If you still see the Connect to iTunes screen after you restart, you need to reinstall iOS: Make sure that you're using the latest version of iTunes. Connect your device to your computer using the cable that came with your device.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect.
Make sure that your device has an up to date because sometimes an outdated system can cause the iPad to get stuck in the headphone mode. You can check if the latest updates are installed on your device. Launching the Settings app > opening the General menu > tapping on the Software Update.
Clean the headphone jack When you connect the headphones, the plug pushes the lint further to the bottom of the jack. If the lint is conductive, it may be messing with the electronic circuits inside the jack, causing the phone to register it as a pair of headphones plugged in.
Slow Internet Speed – If you're accessing Facebook through your phone, chances are you'll be using a wireless connection—either through Wi-FiWi-FiWi-Fi or WiFi (/ˈwaɪfaɪ/) is a family of wireless network protocols, based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. or Cellular data. Your current internet speed may not be enough to connect to Facebook's server. Hence, the “no internet connection” error will show up.
If your Zoom Rooms iPad controller reports that it is unable to connect to the 127.0. 0.1 address on Zoom Rooms, it is likely related to proxy settings. You can perform one of the following: Enter the correct proxy settings on the Zoom Room PC or Mac device.
Verify you use the same WiFi network on both devices. Enable Bluetooth on both the Mac and iPad. On both your Mac and your iPad, sign out of iCloud, reboot both, sign back into iCloud, and finally restart again. Then, try Sidecar using WiFi.
The reasons an iPad won't connect to the internet can include anything from an app issue or software problem to a Wi-Fi network misconfiguration, router issue, or internet service provider problem.
Step 1: Check that your headphones are connected to your phone. On your Android phone, say "Hey Google, open Assistant settings." your headphones. Under "Status," check for "Connected.
Try restarting your iOS or iPadOS device. Here's how to restart your iPhone, iPad, or iPod touch. Then restart your router, and cable or DSL modem. To restart your router or modem, unplug it, then plug it back in.
Make sure that both you and the person that you're calling are using a fast Wi-Fi or cellular connection. If you're trying to use FaceTime over cellular, make sure that Use Cellular Data is on for FaceTime. Go to Settings > Cellular > Use Cellular Data For, and turn on FaceTime.
If you are still unable to connect, the problem may be with your computer network settings. Contact your Internet Service Provider (ISP) or network administrator for the information you need to regain connection.