DFU mode is a low-level device restore state that allows for an iPhone to be restored directly from firmware, it requires a Mac or Windows PC with iTunes to use properly. If you need to enter DFU mode on an iPhone XS, XR, or XS Max, we'll show you how to do so in this walkthrough.
How to restore iPhone XR in DFU mode?
Steps to Enter DFU Mode on iPhone X
- Quickly, press and release the Volume Up button > press and release the Volume Down button.
- After 5 seconds, release the Side button and continue to hold the Volume Down button, until you see “iTunes has detected an iPhone in recovery mode” pop-up on your computer.
How to put iPhone 12 in DFU mode?
How to put iPhone 12 into DFU mode
- Connect iPhone to PC or Mac via USB cable.
- Once your iPhone is paired with computer, press Volume up button, then Volume down button and release.
- Quickly press and hold the Side button for about 5 seconds.
- Along with the Side button, press and hold the Volume down button.
How to put iPhone 8 in DFU mode?
About This Article
- Connect the iPhone to a computer to put it in DFU mode.
- Press and release the "Volume Up" and "Volume Down" buttons then press and hold the side button for 10 seconds.
- Press and hold the "Volume Down" button as well.
- Release the side button after 5 seconds and your phone should be in DFU mode.
How do I put my iPhone XR in DFU mode without a computer?
1:255:16So to hard reset your iPhone tennis tennis max10 are you're going to quickly press the volume upMoreSo to hard reset your iPhone tennis tennis max10 are you're going to quickly press the volume up button the volume down button and then press and hold the side button until the screen turns. Off.
How to put iphone 8 plus in dfu mode?
Follow the steps below to enter DFU mode on iPhone 8 and iPhone 8 Plus.
- Plug iPhone into computer and open iTunes.
- Quickly, press and release the Volume Up button > press and release the Volume Down button.
- Immediately, press and hold the Side button (ON/OFF button).
How to put iphone in dfu mode without computer?
Press and hold the power button until the recovery screen appears. For iPhone 7/7 Plus: Press and hold the power button and the volume down buttons at the same time. Keep holding the buttons until the recovery mode screen appears.
How do I put iPhone in DFU mode?
1:543:06Press the power button for 3 seconds. Then press the lower volume button and hold them both for 10MorePress the power button for 3 seconds. Then press the lower volume button and hold them both for 10 seconds.
How to put apple watch in dfu mode?
As demonstrated in the video, entering DFU mode on the Apple Watch requires that you hold down the Digital Crown and Side button for 10 seconds, and then release the side button while still holding down the Digital Crown. All of this is performed while connected to a Mac via the iBus and a Lightning cable.
How to put ipad pro into dfu mode?
Press and hold the Power button for 3 seconds, until the screen turns black. While you're still holding the power button, press and hold down the volume down button. Continue to hold both buttons down for 10 seconds. If the Apple logo appears, you've held it for too long.
How do I exit DFU mode on my iPhone XR?
How to Exit DFU Mode On iPhone
- Press the Volume Up button on your iPhone and quickly release it.
- Next, press the Volume Down button and quickly release it.
- Finally, press and hold the Power Button (ON/OFF) until you see Apple logo appearing on the screen of your iPhone.
How to put iPhone 13/13 pro in DFU mode?
How to put iPhone 13, 12, 11, X, and iPhone SE 2022 in DFU Mode
- Connect your iPhone to a Mac or PC with a Lightning to USB cable.
- Press and then release the Volume Up button.
- Immediately, press and release the Volume Down button.
- Now, press and hold the Side button for 10 seconds.
Steps to enter DFU mode on your iPhone.
- Step 1: Connect your iPhone to your PC or Mac and make sure that iTunes is running.
- Step 2: Turn off the iPhone by holding the Power button and slide to power off.
- Step 3: Hold the power button for 3 seconds.
How to put iPhone, iPad, iPod into DFU mode easily?
For iPad, iPhone 6s and below, iPhone SE and iPod touch
- Connect the device to a computer using a USB cable.
- Hold down both the Home button and Lock button.
- After 8 seconds, release the Lock button while continuing to hold down the Home button.
- Nothing will be displayed on the screen when the device is in DFU mode.
How to put your iPhone with Face ID into DFU mode?
iPhone or iPad with Face ID
- Turn off your iPhone or iPad and plug it into your Mac or Windows computer.
- Make sure that iTunes or Finder are running.
- Press and hold the side button on your device for three seconds.
- While continuing to hold the side button, press and hold volume down.
Can you put iPad in DFU mode?
DFU mode is a way to recover your iPhone or iPad using a computer. To put an iPhone or iPad into DFU mode, you'll need to use either iTunes or Finder. DFU mode works differently on iPhones and iPads with Face ID, compared to older models. Visit Insider's Tech Reference library for more stories.