Simply tear off a small piece of the block, knead the mass until it is completely soft and then press it against the speaker hole. If you now pull off the putty, the dirt will simply stick to it. To remove any residue of the mass in the recess, press it back into the opening and pull it off until everything is clean.
Use a soft, slightly damp, lint-free cloth—for example, a lens cloth. If material is still present, use a soft, lint-free cloth with warm soapy water. Avoid getting moisture in openings. Don't use cleaning products or compressed air.
The best way to remove bits of dirt and dust from the speaker on the front of the iPhone is to use a brush with soft bristles, ideally a small paintbrush. Consider trimming the bristles down to a half-inch length to give yourself better control.
1:023:47So just plastic or wooden toothpick will do just fine and if you can go ahead and grab a spray canMoreSo just plastic or wooden toothpick will do just fine and if you can go ahead and grab a spray can like this one just kind of spray it out just like that or air it.
Steps to Clean the Speakers:
Compressed air is a simple yet effective computer keyboard cleaner. A good blast of compressed air should be powerful enough to blow away any dust particles and debris that have worked their way into the gaps between keys.
Some sites recommend using compressed air to clean iPhone speakers, but this can easily cause damage. A far safer method is to use an air blower, such as the Soft Tip Silicone Super Air Blower ($7.99, Amazon (opens in new tab)).
Use a can of compressed air. Blow the air over the photo to remove any stuck on dirt or dust. You can also use a soft cleaning brush, which may work better for very delicate photos. Blow or brush the photograph as long as is needed to remove any excess dirt or debris.
The "don'ts" of cleaning your iPhone speakers
There are three main ways to clean your iPhone speakers. You could use a soft-bristle toothbrush to scrub the speaker. You could use canned air to blow debris out of the speaker's nooks and crannies. Finally, you could use adhesive tape to remove the gunk trapped in or around the speaker.
Use Toothbrush Scrub a dry and clean toothbrush against the speakers or if you have rubbing alcohol laying around then dip a slight top of the toothbrush in it and then rub it on the top and bottom iPhone speakers.
0:041:55And it's literally as easy as just grabbing it and dabbing it into that little hole. There. And we'MoreAnd it's literally as easy as just grabbing it and dabbing it into that little hole. There. And we'll just keep doing that a few times.
Hold your air blower a short distance from the speakers and use a few short bursts to remove dust and debris. It won't be as strong as compressed air, but that's a good thing.
Answer: A: gently use canned air as you use a NEW AND DRY toothbrush to clean out the speaker grill holes. while doing this, cover the keyboard with a soft dry cloth to keep same dust from getting under the keys. You can buy a 10 pack for $1 usually.
So how do you keep the dirt out? With a protective sleeve for the case. While we don't ever really get the AirPods case wet at all, even if it's just raining, the waterproof seal these types of cases provide is more than enough to keep the lint and dirt out of the inside of the case.